USK – 1000 BY          CMC HV

DESCRIPTION

USK – 1000 BY is a Technical Grade High Viscosity Sodium Carboxymethyl Cellulose (CMC EHV) meeting the drilling industry standards API Spec 13A Section 10 & OCMA DFCP-7.

 

TYPICAL PROPERTIES

Appearance     Free Flowing White to Creamish Powder
Moisture %      max. 10
pH (1%)          7 – 11

 

FUNCTION  

USK – 1000 BY functions as a high-yield viscosifier while controlling the fluid loss and providing shale inhibition. Due to its rheology control properties on the fluid system, increased drill solids transport capacity is obtained. It also helps the fluid suspending mud weighting agents by encapsulating them.

 

FEATURES

USK – 1000 BY is an effective high-yield viscosifier applicable in Fresh water, Sea water and Salt Saturated water fluid systems. It helps reducing friction pressure and builds a protective colloid on the surface of the drilling well wall. The product is resistant to bacterial degradation and compatible with other drilling fluid additives.

 

PERFORMANCE

Viscometer Dial Reading at 600 rpm
          Deionized Water                       min. 30
          40 g/L Salt Water                     min. 30
          Saturated Salt Water                min. 30

Fluid Loss (ml)                                   max. 10


* As referenced in API Spec 13A Section 10

 

CONCENTRATION

The recommended initial treatment for USK – 1000 BY is from 1 to 3 lb/bbl (2.85 to 8.5 kg/m³)
depending on the salt level, other solid content and water quality.

 

LIMITATIONS

Elevated temperatures will reduce the viscosity of the fluid containing USK – 1000 BY. To avoid the thermal thinning, using an oxygen scavenger or a thermal stabilizer is recommended in excess of 120°C (250°F) in order to protect the polymer.

 

MIXING

USK – 1000 BY should be added to the solution by using high speed conventional mixers at a uniform rate and slowly in order to avoid lumping or fish eye formation and delayed dispersion.

 

HANDLING

USK – 1000 BY is non toxic for environment and not a dangerous material for transport regulations. The product is packed in 25kg moisture proof kraft paper bags and should be stored cool and dry indoors.

 

The above information is best to our knowledge and provided for general informational purposes. UGUR SELULOZ KIMYA makes no warranty or guarantee concerning the handling, use or application of such product whether alone or in combination with other products in case unexpected events occur due to conditions in the application areas. Users are advised to make their own tests to determine the suitability and performance of the product. USK is the registered trademark of UGUR SELULOZ KIMYA. © 2009 UGUR SELULOZ KIMYA, all rights reserved.

 



<<Back